

|
Outdoor PoE Extenders | PoE Injectors |
Brief |
| Industrial network components |
Weatherproof PoE Extenders |
PoE Extender is devised to extend connection distances from PSE to PD another 100 m via Cat5e or Cat6 cable.
The transmission is carried out at a distance of 200 to 500 meters by cascading these extenders to a daisy chain.
Device doesn't need any additional power supply, because it uses a transit PoE from the input cable.
PoE Extender usually works with any PSE or PD devices.
This solves the problem of "only 100 m for PoE and data" and there is a possibility to install IP equipment
(IP Cameras, IP Access Controls, and Wireless Access Points) in the places most suitable for this.
|
 |
NRP-172PRi
High-Power PoE Extender 72W
3 Ethernet TP/1G + High-Power PoE 72W/30W, Booster, 1PD/2PSE
It is possible to cascade 4 devices into a chain up to 500 m
Compensation of voltage drop in the chain (built-in Booster)
Power Consumption: 3W, Does not require an additional power supply
1 port PD IN up to 72W + 2 ports PSE OUT 60W/30W (54VDC or 24VDC)
Housing IP67/IK10, Wall mounting, Waterproof RJ45 connectors
Operating Temperature: -40 to +65°C; Dimensions: 167x73x40mm
|
> Gigabit Ethernet > Built-in Voltage Booster |
> Waterproof RJ45 connectors > 60W_30W 54VDC or 24VDC PoE |
|
NRP-172PRi | 63P2GE69 | Extender: 3 Ethernet 10/100/1000T + PoE 72W/60W/30W, 1PD/2PSE, built-in Booster |
 |
NRP-191PRi | NRP-192PRi IEEE 802.3bt PoE Extender 72W
2/3 Ethernet 10/100/1000T + 802.3af/at/bt PoE, 1PD/1-2PSE
Cascading of couple devices into a chain, doesn't need a power supply
NRP-191PRi: 1 PD IN up to 95W + 1 PSE OUT 72W
NRP-192PRi: 1 PD IN up to 95W + 2 PSE OUT 45W, total 90W
Housing IP67/IK10, Wall mounting, Waterproof RJ45 connectors
Dimensions NRP-191PRi: 209x53x38 mm, Weight: 410g
Dimensions NRP-192PRi: 187x105x45 mm, Weight: 570g
Operating Temperatureà: -40 to +65°C
|
> Waterproof RJ45 connectors |
> Weatherproof Housing |
|
NRP-191PRi | 69P1GE29 | Outdoor Extender: 2 Ethernet 10/100/1000T + 802.3af/at/bt PoE, 1PD/1PSE, -40~65°C |
NRP-192PRi | 69P2GE69 | Outdoor Extender: 3 Ethernet 10/100/1000T + 802.3af/at/bt PoE, 1PD/2PSE, -40~65°C |
PoE Injectors (complies with IEEE 802.bt) |
 |
NIP-172PGB 802.3bt PoE Injector 95W Built-in 24-56 VDC Booster
IEEE 802.3/ 802.3u/ 802.3ab/ 802.3bt/ 802.3at/ 802.3af
95W PCE of maximum power with input voltage of 24-56VDC
POE Pin Assignment: 1/2(+), 3/6(-) and 4/5(+), 7/8(-)
Reverse polarity / Over voltage / Overload protections
Operating Temperature: -40 ~ +75°C; Dimensions: 95x75x30mm
Housing: IP40 Protection, DIN Rail or Wall mounting
External Power Supply 24-56 VDC; Built-in VDC Booster
|
> Complies with IEEE 802.bt |
> Built-in Voltage Booster |
|
NIP-172PGB | 66P1IG95 | 10/100/1000T 802.3bt PoE Injector 95W, 24-56VDC Booster, -40~+75°C |
|