NRP-111PR/ NRP-111PRi PoE Extenders 2 Ethernet 10/100/1000T + PoE 30W, 1PD/1PSE
NRP-101PR/ NRP-101PRi PoE Extenders 2 Ethernet 10/100Base-TX + PoE 30W, 1PD/1PSE
PoE Extenders are devised to extend connection distances from PSE to PD another 100 m via Cat5e or Cat6 cable.
The transmission is carried out at a distance of 200 to 300 meters by cascading these extenders to a daisy chain.
Device doesn't need any additional power supply, because it uses a transit PoE from the input cable,
while its power consumption does not exceed 2,5 watts. PoE Extender usually works with any PSE or PD devices.
This solves the problem of "only 100 m for PoE and data" and there is a possibility to install
IP equipment (IP Cameras, IP Access Controls, and Wireless Access Points) in the places most suitable for this.
The devices are easy to install and operate in Plug & Play mode.
The housing has two RJ45 connectors for one input port and one output ports.
The IN port is connected to the PSE equipment (PoE Injector or PoE Switch) and the OUT ports to the equipment
PD (IP Cameras or Wireless Access Points) or to the next extender.
NRP-1x1PR is designed for indoor installation with an operating temperature 0 ~ 50°C.
NRP-1x1PRi is designed for outdoor installation with an operating temperature of -40 ~ 50°C.
The unit has a rugged outdoor weatherproof housing, rated to IP66 with two glands for cables.
| Complies with IEEE 802.3af/at, PoE PSE/ PoE PD/ PoE auto detection|
| Extends an existing PoE connection beyond the 100m (328-ft.) limit|
| Cascading of multiple devices into a chain is possible|
| 1 port PD IN up to 60W + 1 port PSE OUT 30W/15W|
| POE Pin Assignment: 1/2(+), 3/6(-) and 4/5(+), 7/8(-)|
| Power Consumption: 2.5W, Does not require an additional power supply|
| PoE auto detection ensures that power is only sent to PoE-compliant devices|
| Overload current and reverse polarity protection|
| NRP-1x1PR: Operating Temperature 0~ +50°C; Dimensions 95x72x27mm; Weight 0.2kg|
| NRP-1x1PRi: Operating Temperature -40~ +50°C; Dimensions 140x120x70mm; Weight 0.3kg|
| NRP-1x1PRi Housing: IP66, Wall mounting, Waterproof glands|
|Models||Part Number||Features |
|NRP-111PR ||63P1GFPR||Extender: 2 Ethernet 10/100/1000Base-T + PoE 30W, 1PD/1PSE, 0~50°C|
|NRP-111PRi||63P1GOPR||Extender: 2 Ethernet 10/100/1000Base-T + PoE 30W, 1PD/1PSE, -40~50°C|
|NRP-101PR||63P1TFPR||Extender: 2 Ethernet 10/100Base-TX + PoE 30W, 1PD/1PSE, 0~50°C|
|NRP-101PRi||63P1TOPR||Extender: 2 Ethernet 10/100Base-TX + PoE 30W, 1PD/1PSE, -40~50°C|