PoE Injectors    www.nsgate.ru
NSGate. Be Sure.


Solutions and Applications
Outdoor access Nodes NSBox
PoE Industrial Switches
PoE Injectors
PoE Extenders
Industrial SFP modules
Din-Rail Power Supplies


Ethernet over PDH/SDH
Ethernet over xDSL
Our new products

PoE Extender NRP-172PRi
NRP-172PRi Extender | The best

NSBox Heating
NSBox Heating  for enclosure
PoE  Injectors   Brief

PoE Injectors NSGate

  PoE-injectors are designed to power remote devices PD (Powered Device) such as wireless access points, IP phones, IP cameras using a standard Cat 5e / 6 cable. There are different types of PoE injectors: with or without support for PoE auto detection mode, with external or internal power supply, with Gigabit or only Fast Ethernet, with output power of 15.4, 30, 60 or 95W.
  For example, the new Ultra PoE Injector NIP-191PG uses all four pairs for power supply and guarantees increased power to the output port up to 95W. The load can be powerful wireless access points, PTZ IP cameras.
  There are alternative solutions, called "Passive PoE" or passive PoE-injectors, which allow to use of PoE technology for devices that are not equipped with this feature initially. Such devices can only support electrical compliance with the IEEE 802.3af standard, but not protocol ones.


ACTIVE  PoE  Injectors   (complies with IEEE 802.3af/at/bt)

PoE Injector NIP-191PG NIP-191PG           Ultra PoE Injector  90-95W    Gigabit  (95W)

 IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
 95 watts of maximum power with an input voltage of 56VDC
 POE Pin Assignment: 1/2(+), 3/6(-) 4/5(+), 7/8(-)
 Reverse polarity / Over voltage / Overload protections
 Operating Temperature: -40 ~ +75C;   Dimensions: 104x82x32mm
 Housing: IP30 Protection, DIN Rail or Wall mounting
 NIP-191PG: External Power Supply 48-56VDC
NIP-191PG62P1IG951 10/100/1000T Ultra PoE Injector 95 , External PS 48-56VDC, -40~+75C


PoE Injector PoE- NIP-171PG
NIP-171PG     High-Power PoE Injector  60-72W    Gigabit  (2x36W)
NIP-171PGB                       Built-in 24-56 VDC Booster
 IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
 72W PCE of maximum power with an input voltage of 56VDC
 POE Pin Assignment: 1/2(+), 3/6(-) and 4/5(+), 7/8(-)
 DIP switch: to select 2 or 4 pairs; Mode A or Mode B; 30W or 36W
 Reverse polarity / Over voltage / Overload protections
 Operating Temperature: -40 ~ +75C;   Dimensions: 104x82x32mm
 Housing: IP30 Protection, DIN Rail or Wall mounting
 NIP-171PG: External Power Supply 48-56VDC
 NIP-171PGB: External Power Supply 24-56 VDC;  Built-in VDC Booster
NIP-171PG62P1IG7010/100/1000T PoE Injector 72W (2x36W), External PS 48-56VDC, -40~+75C
NIP-171PGB66P1IG7010/100/1000T PoE Injector 72W (2x36W), 24-56VDC Booster, -40~+75C

PoE Injector PoE- NIP-111PG NIP-111PG                   PoE Injector   802.3at   Gigabit  (30W)
NIP-111PGB                       Built-in 12-56 VDC Booster
 IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
 36W PCE of maximum power with an input voltage of 56VDC
 POE Pin Assignment: 1/2(+), 3/6(-). Mode A EndSpan PoE
 Reverse polarity / Over voltage / Overload protections
 Operating Temperature: -40 ~ +75C;   Dimensions: 104x82x32mm
 Housing: IP30 Protection, DIN Rail or Wall mounting
 NIP-111PG: External Power Supply 48-56VDC
 NIP-111PGB: External Power Supply 12-56 VDC;  Built-in VDC Booster
NIP-111PG62P1IG301 10/100/1000T PoE Injector 30W, External PS 48-56VDC, -40~+75C
NIP-111PGB66P1IG301 10/100/1000T PoE Injector 30W, 12-56VDC Booster, -40~+75C

PoE Injector NIP-404PG NIP-404PG   4-port   PoE Injector   802.3at   Gigabit  (30W)
 IEEE 802.3/ 802.3u/ 802.3ab/ 802.3at/ 802.3af (PoE auto detection)
 30 watts of maximum power with an input voltage of 56VDC
 POE Pin Assignment: 1/2 (+), 3/6 (-)
 Reverse polarity / Over voltage / Overload protections
 Operating Temperature: 0 ~ +50C;   Dimensions: 94x62x20mm
 External Power Supply 48-56VDC
NIP-404PG62P4IG304 10/100/1000T PoE Injector 30W, External PS 48-56VDC, 0~+50C


Passive  PoE  Injectors  

PoE Injector PoE- 24V15W     POE Converter  Active PoE 802.3 af/at to Passive PoE (24VDC)

 Converts Active PoE 802.3 af/at 48VDC --> Passive PoE 24VDC 15W
 POE Pin Assignment: 4/5(+), 7/8(-)
 Compatible with Passive PoE devices Ubiquiti, Mikrotik
24V15WZQGAT24V10/100/1000T PoE Converter: Input 44-56VDC (802.3af/at), Output 24VDC/15W